经营范围
Terapicco STS
TERAPICCO STS
ULTRA HIGH SPEED
STATIC TRANSFER SYSTEM
保证一流的安全和性能
不间断电源切换开关(Static Transfer Switch)为重要敏感的负载输入双路电源，其中一路电源供给负载，当电源出现异常时，通过无缝切换至正常电源侧，向负载稳定提供无间断电源。
本产品采用专利高速开关技术，当负载供电出现异常时，在500㎲内快速稳定地切换将所有负载的供电电源，为需要负载系统不间断运行的场合提供最佳解决方案。
半导体、IDC中心、化工、生物中心等由对电源非常敏感的零部件组成。对于为保护电源而安装的传统双路电源切换开关不能保护的重要产品，能够以500㎲内的最快开关切换速度完美保护的切换开关只有TERAPICCO。
TERAPICCO特点及优点
- 作为一种能稳定所有负载电源的系统，在500㎲内快速稳定地切换供给电源。
- 可以在工程PLC分电盘的MC Coil释放时间内供电。
- 无论是同步还是非同步，当输入电源出现异常时，可随时在500㎲内稳定切换供给电源。
- 无论是AC(交流)/DC(直流)，都能切换供给电源。
双路供给电源选择开关设备
选择连接重要敏感负载的双路电源供给的开关设备。
在供给电源不稳定的情况下，保证无缝、不间断供电。
在供给电源不稳定的情况下，保证无缝、不间断供电。
快速切换开关技术(专利)
无论任何负载种类，在同步/非同步条件下都能以500㎲内速度快速切换不间断电源，以预防负载Shut Down
(原来STS 4~10ms, ATS 10~100ms)。
(原来STS 4~10ms, ATS 10~100ms)。
Real Time电源分析
实时分析供给负载的双路电源(分析大小、停电、Surge、Sag、Dip、频率变化、谐波等影响负载的电源Fault)，可以始终稳定供给电源。
过电流及Short电流检测及保护技术(专利)
输入电源因负载侧短路事故而不稳定时，可保护电源切换开关免受过电流、Short电流的影响，向负载无缝供给稳定的备用电源。
产品内部控制电源及控制器双路化
本设备采用内部控制电源和控制处理器的双路结构，产品具有良好的可靠性及寿命。
安装简便、便于维护。
本设备采用自然对流冷却方式，与现有Fan方式相比，没有噪音，不需要维护。
在输入电源同步/非同步条件下，也可以在500㎲内为负载无缝供电（专利）。
| 主电源/辅助电源 | 切换后STS输出电压 | |
| 同步 |  |
 |
| 非同步 |  |
 |
产品内部控制电源全部出现故障时，具有向负载无缝供电的功能（专利）。
| 主电源/辅助电源 | |
| 原有ATS/STS |  |
| TERAPICCO |  |
控制处理器和控制电源由双路组成，是一款可靠性和寿命都很优异的产品。
检测过电流和SHORT电流，以保护电源切换开关（专利）。
- 因负载侧短路事故输入电源不稳定时，可保护电源切换开关免受过电流、Short电流的影响，向负载无缝供给稳定的备用电源。
通过REAL-TIME电源分析，选择最佳供给电源。
- 实时分析供给负载的双路电源(分析大小、停电、Surge、Sag、Dip、频率变化、谐波等影响负载的电源Fault)，可以始终稳定供给电源。
安装简便、不需要维护。
- 本设备采用自然对流冷却方式，与现有Fan方式相比，没有噪音，不需要维护。
与传统产品的差别
传统STS问题
- 传统STS电源发生问题时，切换其他电源的速度为4~10ms，比较慢，此时负载发生瞬间停电。
▶ 对电源敏感的设备会发生Shut-Down！！ - 采用SCR的传统STS，如果输入的两个Source不同步，可能发生Line short！！
▶ 当输入功率异步时,无法传送!!
ATS
- ATS : 机械双路电源切换开关
- UPS发生故障时，通过ATS机械方式切换备用电源。
- ATS动作时间：10ms~100ms
传统STS vs TERAPICCO波形比较
※ 点击就能扩大形象。
Rack Type 产品规格
I-UHS RMS030
| Model Name | I-UHS RMS030 (CB 00 B 12) |
|---|---|
| Type | 1-phase / 2-pole (With Maintenance Switch) |
| Current rating | 30A |
| Voltage rating (Selectable) |
100-240 V~ (110V, 115V, 120V, 220V, 230V, 240V) |
| Frequency | 50/60 Hz |
| Input Synchronization | No practical limit |
| Power factor | No practical limit |
| Overload capacity | 110%_Fault alarm after 1min |
| Short-circuit current | 8000Arms, 0.5 cycle |
| Safe install environment | External Circuit Breaker |
| Transfer type | High Speed Discrete break-before-make |
|---|---|
| Total STS Transfer Time | < Max. 500us (Same to Asynchronous) |
| Transfer Method | Auto / Manual |
| User interface | LED: IN 1, IN 2, SYNC, OUT, FLT, STATUS, COM, Bypass |
| RS-485&Ethernet (Option) | STS operational status check |
| Dimensions (H W D)(mm) | 19 "× 610 × 2U (19 inch rack mount) |
| Weight | 18kg |
| Ambient Operation Temp. | Min -20°C, Max 50°C |
| Cooling | Natural Cooling System (No FAN) |
| Regulatory | KC Registration, IEC 62310-1,2 CE CoC |
| Standard Warranty | 36 months |
I-UHS RMS030
| Model Name | I-UHS RMS030 (CB 00 B 12) |
|---|---|
| Type | 1-phase / 2-pole (With maintenance Switch) |
| Current rating | 30A |
| Voltage rating (Selectable) |
100-240 V~ (110V, 115V, 120V, 220V, 230V, 240V) |
| Frequency | 50/60 Hz |
| Input Synchronization | No practical limit |
| Power factor | No practical limit |
| Overload capacity | 110%_Fault alarm after 1min |
| Short-circuit current | 8000Arms, 0.5 cycle |
| Safe install environment | External Circuit Breaker |
| Transfer type | High Speed Discrete break-before-make |
| Total STS Transfer Time | < Max. 500us (Same to Asynchronous) |
| Transfer Method | Auto / Manual |
| User interface | LED: IN 1, IN 2, SYNC, OUT, FLT, STATUS, COM, Bypass |
| RS-485&Ethernet (Option) | STS operational status check |
| Dimensions (H W D)(mm) | 19 "× 610 × 2U (19 inch rack mount) |
| Weight | 18kg |
| Ambient Operation Temp. | Min -20°C, Max 50°C |
| Cooling | Natural Cooling System (No FAN) |
| Regulatory | KC Registration, IEC 62310-1,2 CE CoC |
| Standard Warranty | 36 months |
I-UHS RS030
| Model Name | I-UHS RS030 (CB 00 B 12) |
|---|---|
| Type | 1-phase / 2-pole (Without maintenance Switch) |
| Current rating | 30A |
| Voltage rating (Selectable) |
100-240 V~ (110V, 115V, 120V, 220V, 230V, 240V) |
| Frequency | 50/60 Hz |
| Input Synchronization | No practical limit |
| Power factor | No practical limit |
| Overload capacity | 110%_Fault alarm after 1min |
| Short-circuit current | 8000Arms, 0.5 cycle |
| Safe install environment | External Circuit Breaker |
| Transfer type | High Speed Discrete break-before-make |
|---|---|
| Total STS Transfer Time | < Max. 500us (Same to Asynchronous) |
| Transfer Method | Auto / Manual |
| User interface | LED: IN 1, IN 2, SYNC, OUT, FLT, STATUS, COM |
| RS-485&Ethernet (Option) | STS operational status check |
| Dimensions (H W D)(mm) | 19” × 546.5 × 2U (19 inch rack mount) |
| Weight | 13kg |
| Ambient Operation Temp. | Min -20°C, Max 50°C |
| Cooling | Natural Cooling System (No FAN) |
| Regulatory | KC Registration, IEC 62310-1,2 CE DoC |
| Standard Warranty | 36 months |
I-UHS RS030
| Model Name | I-UHS RS030 (CB 00 B 12) |
|---|---|
| Type | 1-phase / 2-pole (Without maintenance Switch) |
| Current rating | 30A |
| Voltage rating (Selectable) |
100-240 V~ (110V, 115V, 120V, 220V, 230V, 240V) |
| Frequency | 50/60 Hz |
| Input Synchronization | No practical limit |
| Power factor | No practical limit |
| Overload capacity | 110%_Fault alarm after 1min |
| Short-circuit current | 8000Arms, 0.5 cycle |
| Safe install environment | External Circuit Breaker |
| Transfer type | High Speed Discrete break-before-make |
| Total STS Transfer Time | < Max. 500us (Same to Asynchronous) |
| Transfer Method | Auto / Manual |
| User interface | LED: IN 1, IN 2, SYNC, OUT, FLT, STATUS, COM |
| RS-485&Ethernet (Option) | STS operational status check |
| Dimensions (H W D)(mm) | 19” × 546.5 × 2U (19 inch rack mount) |
| Weight | 13kg |
| Ambient Operation Temp. | Min -20°C, Max 50°C |
| Cooling | Natural Cooling System (No FAN) |
| Regulatory | KC Registration, IEC 62310-1,2 CE DoC |
| Standard Warranty | 36 months |
Wall Type 产品规格
STS-1000
| Model Name | STS-1000 (PC 00 B 12) |
|---|---|
| Type | 1-phase / 2-pole |
| Current rating | 6.5A |
| Voltage rating (Selectable) |
100-240 V~ (110V, 115V, 120V, 220V, 230V, 240V) |
| Frequency | 50/60 Hz |
| Input Synchronization | No practical limit |
| Power factor | No practical limit |
| Overload capacity | 110%_Fault alarm after 1min |
| Short-circuit current | 5000Arms, 0.5 cycle |
| Safe install environment | External Fuse or External Circuit Breaker |
| Transfer type | High Speed Discrete break-before-make |
|---|---|
| Total STS Transfer Time | < Max. 500us (Same to Asynchronous) |
| Transfer Method | Auto / Manual |
| User interface | LED: IN 1, IN 2, SYNC, OUT, FLT, STATUS, COM |
| RS-485&Ethernet (Option) | STS operational status check |
| Dimensions (H W D)(mm) | 127.5 × 190.6 × 289 (H : Button Include) |
| Weight | 4.2kg |
| Ambient Operation Temp. | Min -20°C, Max 50°C |
| Cooling | Natural Cooling System (No FAN) |
| Regulatory | KC Registration, IEC 62310-1,2 CE CoC |
| Standard Warranty | 36 months |
STS-1000
| Model Name | STS-1000 (PC 00 B 12) |
|---|---|
| Type | 1-phase / 2-pole |
| Current rating | 6.5A |
| Voltage rating (Selectable) |
100-240 V~ (110V, 115V, 120V, 220V, 230V, 240V) |
| Frequency | 50/60 Hz |
| Input Synchronization | No practical limit |
| Power factor | No practical limit |
| Overload capacity | 110%_Fault alarm after 1min |
| Short-circuit current | 5000Arms, 0.5 cycle |
| Safe install environment | External Fuse or External Circuit Breaker |
| Transfer type | High Speed Discrete break-before-make |
| Total STS Transfer Time | < Max. 500us (Same to Asynchronous) |
| Transfer Method | Auto / Manual |
| User interface | LED: IN 1, IN 2, SYNC, OUT, FLT, STATUS, COM |
| RS-485&Ethernet (Option) | STS operational status check |
| Dimensions (H W D)(mm) | 127.5 × 190.6 × 289 (H : Button Include) |
| Weight | 4.2kg |
| Ambient Operation Temp. | Min -20°C, Max 50°C |
| Cooling | Natural Cooling System (No FAN) |
| Regulatory | KC Registration, IEC 62310-1,2 CE CoC |
| Standard Warranty | 36 months |
STS-2000
| Model Name | STS-2000 (PC 00 B 12) |
|---|---|
| Type | 1-phase / 2-pole |
| Current rating | 12A |
| Voltage rating (Selectable) |
100-240 V~ (110V, 115V, 120V, 220V, 230V, 240V) |
| Frequency | 50/60 Hz |
| Input Synchronization | No practical limit |
| Power factor | No practical limit |
| Overload capacity | 110%_Fault alarm after 1min |
| Short-circuit current | 5000Arms, 0.5 cycle |
| Safe install environment | External Fuse or External Circuit Breaker |
| Transfer type | High Speed Discrete break-before-make |
|---|---|
| Total STS Transfer Time | < Max. 500us (Same to Asynchronous) |
| Transfer Method | Auto / Manual |
| User interface | LED: IN 1, IN 2, SYNC, OUT, FLT, STATUS, COM |
| RS-485&Ethernet (Option) | STS operational status check |
| Dimensions (H W D)(mm) | 152.5 × 190.6 × 289 (H : Button Include) |
| Weight | 4.3kg |
| Ambient Operation Temp. | Min -20°C, Max 50°C |
| Cooling | Natural Cooling System (No FAN) |
| Regulatory | KC Registration, IEC 62310-1,2 CE CoC |
| Standard Warranty | 36 months |
STS-2000
| Model Name | STS-2000 (PC 00 B 12) |
|---|---|
| Type | 1-phase / 2-pole |
| Current rating | 12A |
| Voltage rating (Selectable) |
100-240 V~ (110V, 115V, 120V, 220V, 230V, 240V) |
| Frequency | 50/60 Hz |
| Input Synchronization | No practical limit |
| Power factor | No practical limit |
| Overload capacity | 110%_Fault alarm after 1min |
| Short-circuit current | 5000Arms, 0.5 cycle |
| Safe install environment | External Fuse or External Circuit Breaker |
| Transfer type | High Speed Discrete break-before-make |
| Total STS Transfer Time | < Max. 500us (Same to Asynchronous) |
| Transfer Method | Auto / Manual |
| User interface | LED: IN 1, IN 2, SYNC, OUT, FLT, STATUS, COM |
| RS-485&Ethernet (Option) | STS operational status check |
| Dimensions (H W D)(mm) | 152.5 × 190.6 × 289 (H : Button Include) |
| Weight | 4.3kg |
| Ambient Operation Temp. | Min -20°C, Max 50°C |
| Cooling | Natural Cooling System (No FAN) |
| Regulatory | KC Registration, IEC 62310-1,2 CE CoC |
| Standard Warranty | 36 months |
WMS020维护开关
（与 STS-1000 型号相同）
